//GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007
//More information: https://www.gnu.org/licenses/gpl-3.0.txt
//ABSOLUTELY NO WARRANTY!!!
//Made by Ostfriese

//############################## Config     ############################
let Config = {
    temp_diff: 2,
    temp_min: 12,
    id_inside: 100,
    hum_target: 55,
    interval: 10, // 2 seconds is the minimum interval
    Tank_Sensor: 0, //Sensor Wasserstand
    comp: 0, // Kompressor
    FanH: 1, // Luefter Schnell
    FanL: 2, // Luefter langsam
    LedG: 3,
    LedR: 4,
    LedB: 5
}
//############################## Config  end ############################

function LedsOff() {
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.LedR) + '?turn=on'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.LedG) + '?turn=on'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.LedB) + '?turn=on'
    });
}

function Gruen() {
    LedsOff();
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.LedG) + '?turn=off'
    });
}

function Rot() {
    LedsOff();
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.LedR) + '?turn=off'
    });
}

function Blau() {
    LedsOff();
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.LedB) + '?turn=off'
    });
}

function allesAus() {
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.comp) + '?turn=off'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.FanH) + '?turn=off'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.FanL) + '?turn=off'
    });
    LedsOff();
}

function niedrigeStufe() {
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.comp) + '?turn=on'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.FanH) + '?turn=off'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.FanL) + '?turn=on'
    });
    Blau();
}

function hoheStufe() {
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.comp) + '?turn=on'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.FanH) + '?turn=on'
    });
    Shelly.call("http.get", {
        url: 'http://127.0.0.1/relay/' + JSON.stringify(Config.FanL) + '?turn=off'
    });
    Blau();
}

function watch() {
    try {
        temperature = Shelly.getComponentStatus('Temperature', Config.id_inside).tC;
        humidity = Shelly.getComponentStatus('Humidity', Config.id_inside).rh;
        tank = Shelly.getComponentStatus('Input', Config.Tank_Sensor).state;
        //print('Temp. inside  =',temp_inside);
        print('Hum. Inside =', humidity);
        print('tank= ', tank);
        //inside <= minimum
        if (humidity <= Config.hum_target) {
            //allesAus();
            Gruen();
            print('Relay(', Config.comp, ') off. Inside hum <= ', Config.hum_target);
        } else {
            delta = humidity - Config.hum_target;
            //delta more than or equal Config.temp_diff
            //if (!tank && delta >= Config.temp_diff) {
                //niedrigeStufe();
                Blau();
            //    print('Relay(', Config.comp, ') on. Delta >= ', Config.hum_target);
            }
            //delta less than Config.temp_diff
            //else {
                //allesAus();
            //    Gruen();
            //    print('Relay(', Config.comp, ') off. Delta < ', Config.hum_target);
            //}
        //}
        print('\n')
    } catch (err) {
        //allesAus();
        //Rot();
        print(err);
    }
}

function start() {
    LedsOff();
    //allesAus();
    // do a first shot
    print('Starting....');
    watch();
    // set watch timer to configured value
    Timer.set(Config.interval * 1000, true, watch);
}

// schedule script start for 1 second
Timer.set(1000, false, start);